150 Plates 304stainless steel heat exchanger Brazed plate type water heater 120/100/80/60/50/38/32/24 Plates floor radiator

304 Stainless Steel Brazed Heat Exchanger
Material: 304 stainless steel
Optional layers: 150 layers/120 layers/100 layers/80 layers/60 layers/50 layers/38 layers/32 layers/24 layers
Optional valve: manual valve/automatic valve optional
Optional styles: same side/different side, different side by default, if you need the same side, please leave a message when placing an order
Optional heating interface: 1 inch/six points, the default is 1 inch, if you need a six point interface, please leave a message when placing an order

Features:
1. No gas NO electricity, zero cost, use the heat of heating and hot water to heat the tap water to
30°C- -60°C domestic hot water.
2. Mini size, exquisite appearance and high thermal efficiency. Tap water outlet temperature and heating temperature
The water temperature difference is about 5C.
3. It is hot and ready to use, and the water temperature is constant, which can meet the needs of cooking, bathing, washing clothes, etc.
4, food stainless steel material, never rust, corrosion resistance.
5. The patented technology of vortex channel design, never scaling, zero resistance.

Precautions:
1. A filter must be installed before the hot water inlet of the hot water to prevent the blockage of the hot water.
2. When installing, make sure that the hot water and cold water enter the superheated water as the convection flow direction.
3. When not in use for a long time, the accumulated water in the water heater should be drained to prevent the occurrence of low temperature freezing or high temperature corrosion.
4. If the heat exchange efficiency of the superheated water decreases, cleaning and descaling should be carried out in time.
5. Before installing the brazed plate type over-water heating, thermal insulation materials should be used for thermal insulation treatment to eliminate condensed water.
6. The overheating must be installed vertically.
7. The heating water inlet connector is connected below.

Working principle:
Brazed heat exchanger: (Household small water heater) No gas or electricity, hot water is always available. Use the heat of the heating to heat the tap water into 30°C- -60°C domestic water.
The equipment is connected in series to the heating pipe, and without affecting the heating, the high-temperature hot water of the heating and the tap water (absolutely not mixed) exchange heat inside the equipment, the tap water absorbs heat, and the water temperature increases rapidly to become hot water. In other words, the tap water is heated by using the heat of the high-temperature hot water in the heating system, and it is hot as soon as it is turned on, without waiting. There is a lot of hot water produced, the water temperature is high, and the temperature difference with the heating hot water temperature is about 5C. The heating hot water circulates rapidly, providing a steady stream of heat, and can achieve continuous supply of clean hot water all day long. For bathing, washing vegetables, cooking, laundry, etc., hot water is available. Keep your tap water cold in winter|